Yaesu SCU-27 Rotator Control Cable
Did you know you all you need to control your Yaesu (DXA or DXC) G-800/1000/2800 rotator from your Yaesu FT-950, FT-2000, FT-2000D, FTDX-1200, FTDX-3000 or FTDX-5000 transceiver radio is a cable?
With our DXA/C-6′ interconnecting cable, front panel control from your Yaesu transceiver and your Yaesu DXA/DXC rotator is possible.
See our Ham Supply / Idiom Press RotorCard for “computer” control of your Yaesu rotator.
Our Ham Supply DXA/C-6′ Rotator Control Interface Cable is a direct replacement for the Yaesu SCU-27 interface cable. Like the Yaesu SCU-27, the Ham Supply DXA/C-6′ cable connects between the Yaesu FT-950, FT-2000, FT-2000D, FTDX-1200, FTDX-3000, and FTDX-5000 transceiver series and Yaesu G-800, G-1000, and G-2800 (DXA or DXC) rotator control boxes. It is not required on Yaesu SDX series rotators, nor is it required on our Ham Supply DXA or SDX Computer Control RotorCards.
Our Ham Supply DXA/C-6′ cable allows direct control of your Yaesu G-800/, G-1000, and G-2800 (DXA and DXC) rotators from your Yaesu FT-950, FT-2000, FT-2000D, FTDX-1200, FTDX-3000 or FTDX-5000 transceiver. Our Ham Supply DXA/C-6′ cable has two molded 6 pin mini-DIN connectors and is 6′ long, long enough for almost any configuration between your transceiver and rotator control box. One end connects to the rotator control box, the other to the rear of your rig. It’s that simple!
Yaesu Rotor Accessories
Yaesu RotorCard DXA: Computer control RS-232/USB point & shoot rotor control board (DXA series rotors)
Yaesu RotorCard SDX: Computer control RS-232/USB point & shoot rotor control board (SDX series rotors)
USB/RS232 Converter Cable: Gold plated connectors, 3′
Yaesu Illuminator: 3 LED light board for Yaesu rotor controllers
DXA/C-6′ Mini-DIN 6′ Cable: Front panel transceiver control of your Yaesu DXA rotor controller
Pricing and Ordering